Betekenis van:
operation code

operation code
Zelfstandig naamwoord
    • the portion of a set of operation descriptions that specifies the operation to be performed; the set of operations in a computer

    Synoniemen

    Hyperoniemen


    Voorbeeldzinnen

    1. Wine Operation Code
    2. Recovery operation R code
    3. Interrogator code 0 has been reserved by ICAO for operation without an assigned code.
    4. INTERNATIONAL MANAGEMENT CODE FOR THE SAFE OPERATION OF SHIPS AND FOR POLLUTION PREVENTION (INTERNATIONAL SAFETY MANAGEMENT (ISM) CODE)
    5. Disposal/recovery operation(s) (2) D code/R code (5): Technology employed (6): Reason for export (1, 6):
    6. INTERNATIONAL MANAGEMENT CODE FOR THE SAFE OPERATION OF SHIPS AND FOR POLLUTION PREVENTION
    7. ‘Rolling code’ means an electronic code consisting of several elements the combination of which changes at random after each operation of the transmitting unit.
    8. high-speed passenger craft constructed before 1 January 1996 and complying with the requirements of the High-Speed Craft Code shall continue operation certified under that Code;
    9. When the II/SI code operation is activated, the lockout maps shall not be taken into account for transponders lacking SI code capability.
    10. Code referring to the Annexes of Directive 75/442/EEC (see list F); only operation 3 applies in this set
    11. Numeric identification code as defined in Annex P of the TSI on ‘traffic operation and management’ (hereafter OPE TSI) [1].
    12. support the use of II/SI code operation in compliance with the requirements specified in Annex III.
    13. Mode S interrogators, when operating with an SI code and if enabled by an appropriate operational parameter, shall interrogate transponders lacking SI code capability using the Mode S multisite lockout protocol messages foreseen for II code operation.
    14. The verification activities shall demonstrate the conformity of constituents supporting II code and SI code lockout protocols and II/SI code operation with the interoperability and performance requirements of this Regulation, or their suitability for use whilst these constituents are in operation in the test environment.
    15. The International Management Code for the Safe Operation of Ships and for Pollution Prevention, hereinafter referred to as ‘the ISM Code’, was adopted by the International Maritime Organisation (IMO) in 1993.